43
M_LS900 Fibre - LS900 Edge_EN_C
Using the machine
4. Transferring the file
1. Check that the USB cable is correctly connected at both ends.
2.
Check that the machine screen says "Ready to receive".
3. Graphics software: Click on: Print...
Program Laserstyle: click on the icon:
. Click on:
.
A status screen appears showing the work done as a percentage. The fact that the status screen disappears
does not mean that the file is completely in the machine memory. Downloading a file can take several minutes
depending on its size and the PC speed.
Once the file is downloaded, the machine display updates automatically. The screen displays the file name
and certain parameters.
5.
Positioning the object to be engraved
To load and position the keyring on the engraving table inside the machine:
1. Open the front door.
2. Position the keyring in the top left corner of the table, against the scaled rules.
6. Focusing
Check that the table is low enough for the moving head not to touch the keyring.
Automatic focus adjustment (automatic Z Ref.): using autofocus, the focal height is adjusted automatically.
Autofocus
Press the key:
or enable autofocus in the driver.
Autofocus is performed automatically at each engraving launch. Disable autofocus when engraving a set of
plates of the same thickness. To save time, autofocus is only performed on the first plate.
