![background image](http://html1.mh-extra.com/html/gravograph/ls900-edge/ls900-edge_operating-and-maintenance-manual_2258801035.webp)
35
M_LS900 Fibre - LS900 Edge_EN_C
Connections - Installation
Switching on the machine
Place the switch in the "I" position (On).
The screens must follow on from one another:
SET UP
FPGA
X.X
<< GRAVOGRAPH >>
FPGA
X.XX
LCD
SOFT
X.XX
32
Mo
BOOT
X.XX
<READY TO RECEIVE >
The machine is ready for operation.
Do not load files until the display says "Ready to receive". This could cause incorrect
loading of the file. Loading a damaged file could cause incorrect laser emission, which
could damage the engraving machine.
Resolution of the problems
If the machine does not switch on:
•
Check that the power cord is correctly plugged in to both the machine and the power supply.
•
Check that there is power to the mains plug.