GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Modifications reserved. No liability for printing errors 11/2010
9
The aileron and landing flap pushrods are assembled as shown in the following
sequence of photos.
Set the servo and each control surface to neutral, then adjust the length of the
pushrods and apply a drop of UHU thread-lock fluid to prevent them shifting.
The next step is to locate the undercarriage channel in the wings using your
fingertips. Remove the film over the channels using the tip of a hot soldering iron.
Insert the undercarriage leg in the channel prior to marking the position of the two
saddle clamps and the wheel fairing support block.
