GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Modifications reserved. No liability for printing errors 11/2010
22
Glue two strips of wood to the inside of the cowl as shown, to act as stop-strips for
the hatch. Around half of the width of the strips should be glued to the cowl, and they
must project inside the opening so that the hatch rests on them.
The canopy
Glue the instrument panel, the seat backrests and the pilot figure to the inside of the
canopy recess.
The instrument panel should be attached to the fuselage using four pan-head self-
tapping screws in addition to glue.
Allow the glued joints to set hard before attaching the clear canopy to the fuselage;
you can glue it in place or use small screws.
