GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Modifications reserved. No liability for printing errors 11/2010
14
Fix the noseleg in the brackets by tightening the screw in the collet.
Install the nosewheel steering cables as shown in the photographs.
As with the other control systems, it is important to check that the nosewheel is
exactly at the “straight ahead” position when the steering servo is at centre. Later the
nosewheel steering servo and the rudder servo can be connected to the same
receiver socket using a Y-lead; alternatively they can be linked using a mixer.
Attach the wheel fairing to the support block using four self-tapping screws, as shown
in the photos.
The nosewheel can now be fitted on the axle and secured using two collets, as
described for the main undercarriage units.
Attach the elevators to the tailplane panels by installing the hinges, as described for
the ailerons and rudder, and fit the horns as described for the ailerons.
