GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Modifications reserved. No liability for printing errors 11/2010
3
Notes on building the model
•
Before you start building the aircraft it is essential to study the plan and read right
through the instructions. Please bear in mind the dangers inherent in the handling
of tools.
•
When preparing wiring, be sure to use cable capable of carrying the currents
which will flow when the model is flying.
•
Deploy the receiver aerial as far away as possible from high-current cables (at
least 3 cm).
•
Remove all traces of grease from the joint surfaces of components which are to
be glued. A good method is to sand lightly before wiping with a non-greasy liquid
detergent solution. The same applies to surfaces which are to be painted,
otherwise the paint will not adhere permanently. Before gluing any GRP parts,
and GRP fuselages in particular, the joint surfaces must be sanded thoroughly
with fine-grit abrasive paper before de-greasing with a solvent such as acetone.
This is the only method of obtaining durable glued joints involving GRP parts.
Additional essential accessories
Petrol / glowplug engine and accessories
Recommended internal-combustion engines
Engine
Order No.
Capacity
cc
Silencer
Order No.
Propeller
Order No.
OS MAX FS 200 S
2728
32.4
2728.33
Included with
engine
1318.45.25
G 26 petrol engine
1903
26
1903.33
1318.45.25
MVVS 40 petrol engine
2781
39.7
2781.33
55 x 25 cm
2960.55.25
Recommended electric power system
Electric motor
Order No.
Propeller
Order No.
Flight battery
Order No.
Speed controller
Order No.
Battery
link lead
Order No.
COMPACT
740 Z
7780
45 x 25 cm
1328.45.25
LiPo 3/5200
11.1 V / 5.2 Ah
9752.3
COMPACT
CONTROL 90S
7208
2970.R
