29 / 34
S1038_Q06_V1.0pn_en
10mAh I 0A
0:00 Dir: 0°
11.6V Alt: 0m
0km/h 0°
0 0m
C+00016 +00060 -00011
The default "10" indicates the compass direction in degrees in the
bottom line of the copter display to the right of the " " so that it can
be checked, for example, after recalibrating the compass. The char-
acters 2 ... 14 in front indicate raw values and the "C" at the begin-
ning of the line stands for "Compasslogging". In addition, this display
can be used to check the current calibration: In the case of a copter
that is fixed to the west or east, the right degree indicator may only
change slightly when the motors are off, running at minimum throt-
tle or when hovering. Otherwise, a current calibration should be per-
formed.
The other logging functions are exclusively intended for the service.
REBOOT
Yes, replaces the disconnection and plugging of the battery with
menu items that would otherwise only become active after the main
battery is disconnected and reconnected, such as CH9, TYPE, ESC,
Mode: Normal mode, Acro 3D, controller settings.
When going back from Acro 3D to normal, you should reboot twice
as a precaution.
Summary of Contents for Falcon 12 plus
Page 2: ...2 34 S1038_Q06_V1 0pn_en...
Page 34: ......
