17 / 34
S1038_Q06_V1.0pn_en
• VOLTAGE
After switching through this connection port as described before,
a DC voltage of max. 25,5 V can be displayed instead of the
receiver voltage. This way it is possible to monitor the main bat-
tery voltage without using external sensors.
Note
For safety reason the "
C5
" and "
C6
" changes take effect after switch-
ing off and on the copter.
C6: SERVO/SUMDI/SBUSin/SMARTAUDIO
• SERVO
The receiver-specific connection is suitable for operating a servo
or comparable RC components.
• SUMDI
A receiver SUMD or SUMD3 signal can be connected as a satellite
receiver with this setting to allow redundant reception.
• SBUSin
A receiver SBUS signal can be connected as a satellite receiver
with this setting to allow redundant reception.
• SMARTAUDIO
enables following SMARTAUDIO functions at C6.
Video channel
If a smart audio compatible FPV video transmitter with smart audio
is connected to port 6, then a channel 1-8 of the Raceband video
channels can be set via this menu item. In Europe may be used only
race band R3-R6 channels except for events with permission.
VTX power
If a smart audio compatible FPV video transmitter V2 or newer with
smart audio is connected to port 6, then the transmission power can
be set via this menu item. However, the setting is for the current bat-
tery only and will not be saved.
After disconnecting the power supply and reconnecting the power
supply, the transmission power 0 is automatically active again until
it is set differently again.
Summary of Contents for Falcon 12 plus
Page 2: ...2 34 S1038_Q06_V1 0pn_en...
Page 34: ......
