GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Changes reserved! No liability for printing errors ID. no. 0063067 07/2012
22
The purchaser must assert claim for guarantee performance in writing, which is to be
accompanied by the original purchase receipt (e.g. invoice, receipt, delivery note)
and this guarantee card. The purchaser must also return the defective goods to the
above address at his/her own cost.
The purchaser is to state in the claim the nature of the material or processing defect
or the defect's symptoms specifically enough that a review of our guarantee
obligation is possible.
The transportation of the object from purchaser to us as well as return transportation
is at the risk of the purchaser.
Period of validity
This declaration is only valid during the entitlement period for making claims as
stipulated by this declaration. The entitlement period is 24 months from the item's
date of purchase by the consumer from a dealer in the Federal Republic of Germany
(purchase date). If claims are made for defects after expiration of the entitlement
period or the defects in the claim are not substantiated as required by this declaration
or documents are only submitted after expiration of the entitlement period, then the
purchaser is not entitled to rights or claims under this declaration.
Limitation period
To the extent we do not acknowledge liability for a properly submitted claim as
specified by this declaration within the entitlement period, all rights of this declaration
have a 6 month period of limitation from the point in time of claim submission but not
earlier than the end of the entitlement period.
Applicable law
This declaration and all claims, rights and obligations arising therefrom are governed
exclusively by German substantive law without the norms of international private law
and under exclusion of applicability for the UN Convention on the International Sales
of Goods.
The following points must absolutely be observed:
•
Check the model for reliable response to the remote control unit and all plug-in
connections for secure connection before starting the model.
•
The batteries must have an adequate charge and the remote control unit's range
must be tested. The transmitter and receiver batteries, in particular, must be
charged before every start.
•
Check if the radio channel to be used is free. Never fly the model if it is not sure
that the radio channel is free.
•
Comply with the recommendations and notices associated with the remote control
set and accessories.
•
Be sure the servos are not mechanically obstructed throughout their range of
motion.
•
Batteries may not be short-circuited.
•
Remove the batteries for transport and when the model is not in use.
•
Do not expose the model to strong humidity, hot or cold temperatures or
contamination.
