GRASS VALLEY UCP-3901, User Manual

Page: 87 / 210

87
UCP - 3901
User Manual
To Set Multicast Details
1 Select the required Video Std .
2 Enter IP address and IP port number details in the ‘New settings’ column, as required.
Click
S
or press the enter key to enter each new value.
3 Select the Flow Type .
4 Click Take .
Spigot Link When inputs are linked together to support an UHD quad link output,
this shows the group of 4 output spigots used for this. See Link
Control on page 71 to enable UHD inputs.
Master X-Y:
This is a range of spigots that the above settings apply to.
Slaved to X: This is the spigot on which the above settings come from.
Take Click to apply any changes made to the above parameters.
Primary and
Secondary Panes
The Primary IP flows pass through one network connection (usually
SFP1), while the Secondary IP flows pass through another network
connection (usually SFP2).
Status The Status panel reports the video, audio, and metadata status
information for each enabled flow.
• Mac - IP flow received over IP network.
• Loopback - IP flow received by the UCP - 3901 Card looped-back
from the UCP - 3901 Card. Loop-back can be achieved by either
explicitly setting the UCP - 3901 Card to receive a flow from itself,
or by using the UCP - 3901 Card’s loop-back router facility. See
Loopback Router on page 114.
Flow Panes for
Video, Audio and
Metadata
Displays Video, Audio, and Metadata status, and allows multicast IP
and port details to be defined for the selected spigot. IP flow settings
may be set through GV Orbit.
The
Current column shows the present value. To manually set the
multicast details for the spigot, set the value in the New column and
click to save the details, or to return to the preset default
value.
• Enter
Multicast IP
and
Multicast Port
details as required.
• Enter the appropriate details in the Source IP and Source Port
fields. Each spigot can support a variety of flows.
• Select the required flow type (video standard) from the Flow
Type
drop-down list.
To support redundancy (SMPTE ST 2022-7), you must set the Flow
Type
to 2110 for both the primary and secondary ports for the
Video, Audio, and Metadata essences and set Streaming to Dual .
To verify that redundancy is working, see Testing if Network
Redundancy (SMPTE ST 2022-7) is Working on page 200.
Packetizer Stats: set to view network statistics for the flow, if required.
Parameter Description