GRASS VALLEY UCP-3901, User Manual

Page: 104 / 210

104
Essence Processing SDC
Logging - SFP
Where N is the input/(Q)SFP number and X is the lane. To identify SFP 1 / 2, see Rear Panel and
Connectors on page 24.
TEMP_ N _STATE= Logs temperature sensor state. Valid values are:
• WARN:Disabled - Temperature sensor disabled.
• WARN:Low - Low, but in tolerance.
• WARN:High - High, but in tolerance.
•
OK
• FAIL:Low - Low and out of tolerance.
• FAIL:High - High and out of tolerance.
VOLTAGE_ N _NAME= Logs voltage sensor name.
VOLTAGE_ N _VALUE= Logs current voltage reading.
VOLTAGE_ N _STATE= Logs temperature sensor state. Valid values are:
• OK
• WARN:Low - Low, but in tolerance.
•
WARN:High
- High, but in tolerance.
SFP_ N _WAVELENGTH= Logs transmit wavelength in nm.
SFP_ N _ X _LASER_BIAS= Logs bias level in mA.
SFP_ N _ X _TX_POWER= Logs transmit power level in dBm.
SFP_ N _ X _TX_POWER_STATE
=
Logs transmit power level. Valid values are:
• OK
• WARN:Low - Low, but in tolerance.
• WARN:High - High, but in tolerance.
•
FAIL:Low
- Low and out of tolerance.
• FAIL:High - High and out of tolerance.
SFP_ N _ X _RX_POWER= Logs receive power level in dBm.
SFP_ N _ X _RX_POWER_STATE
=
Logs receive power level. Valid values are:
•
OK
• WARN:Low - Low, but in tolerance.
• WARN:High - High, but in tolerance.
• FAIL:Low - Low and out of tolerance.
•
FAIL:High
- High and out of tolerance.
SFP_N_POWER_DRIVER= Power supply to the SFP is OK or FAIL .
Parameter Description