GRASS VALLEY UCP-3901, User Manual

Page: 187 / 210

187
UCP - 3901
MV SDC Chapter User Manual
•
Cancel
- This closes the Unit Upgrade dialog. If an upgrade is in progress,
confirmation of this action is requested.
•
Upgrade
- see below.
• Import upgrade from unit - This creates a software release from the version
currently on the unit. Note that this option is only displayed if the unit's version is
not already in the list of software releases.
3 Select a software version from the
Software Release
dropdown.
4 Click Upgrade .
This starts the upgrade process. The Densité status LED alternates between red and
green during the upgrade process. See Front Card-edge Interface , on page 19.
Prior to the upgrade process beginning, a check is made to see whether the unit's
current version is available in the list of software releases. If not, a dialog displays
prompting to save the unit's current software release before upgrading.
At the end of the upgrade, if the unit does not come back online, a dialog displays.
Further attempts are made to establish contact with the unit until it either, comes back
online, or the Cancel button is pressed. Cancelling this operation has no effect on the
success or otherwise, of the upgrade operation.
To delete RollCall’s cache for the UCP - 3901
If the upgrade changes any RollCall menu, then these UCP - 3901 menus in RollCall may be
empty or configuration information is missing or incoherent. Always delete RollCall’s cache
for the UCP - 3901 after an upgrade.
1 In RollCall, right-click UCP - 3901 and select Delete Cache.
Fig. 8-7: UCP - 3901 Menu
2 Close and restart RollCall.
Note:
The control panel cannot be used while performing an upgrade.