GRASS VALLEY UCP-3901, User Manual

Page: 71 / 210

71
UCP - 3901
User Manual
Link Control
The
Link Control
page allows 4K UHD spigots to be aggregated and synchronized by the
UCP - 3901 Card. Inputs/outputs can be set to be single or quad-link. See Configuration on
page 48 for information on selecting the required input/output configuration.
Figure 5 - 17: Link Control Page
Parameter Description
Spigots When Enable is set, this show the 4 spigots that are to be used for the
4K UHD quad link signals. The individual spigots must be configured
as HD signals. See Input Spigots on page 81 and Output Spigots on
page 85.
On the rear panel, see
12G/3G/HD/SD-SDI I/O – Serial digital video
inputs / outputs (4) on page 26 and 3G / HD / SD SDI I/O – Serial digital
video inputs / outputs (12) on page 26 to know on which BNC input /
output each spigot is available.
Enable Enable the spigots to be used for UHD Quad Links as required. Note
that these controls are not available when using 12G.
Disable SDI Sync
Bit
Some older SDI receiving equipment may not support sync bit
insertion. When transmitting signals to these devices, sync bit
insertion can be disabled by checking the boxes as required.