GRASS VALLEY Profile XP PVS1100, Installation Manual

Page: 33 / 42

18 September 2002 PVS 1100 Series Installation Guide
33
Test your system setup using
VdrPanel
In this step, you will use VdrPanel in local control to test the record and play channels.
This procedure assumes you have video and audio signals connected to the inputs of
all record channels and have a way of monitoring the video, audio, and timecode
outputs.
In systems without record channels you must use the video network to transfer a clip
from another Profile. (See “Using Media Manager” in the Profile XP User Manual).
To test PVS1100 channels using VdrPanel:
1. Start VdrPanel using the desktop shortcut or by selecting
Start | Programs | Profile
Applications | VdrPanel
. The VdrPanel window appears.
NOTE: The first time VdrPanel runs, a panel opens for each default record and
play channel. The number of default channels depends on your PVS1100 model.
Refer to “Default Video Connections” on page 7.
2. Record a short clip, a few seconds in duration as follows:
a. Click the
Record
button in the panel for a record channel. Recording starts. The
Size
display indicates compressed frame sizes during record as timecode
advances in the Timecode display.
b. Click the
Stop
button to end the recording. Notice the clip name in the clip list
is #1.
1
6
1
9