GRASS VALLEY Profile XP PVS1100 Installation Manual Download Page 39

Page: 39 / 42

Select an RS-422 control protocol

18 September 2002

PVS 1100 Series Installation Guide

Setting up RS-422 remote control using Prolink (Profile protocol)

Use this procedure to start and set up Prolink to control the PVS1100 using Profile
protocol.

1. Close VdrPanel if you used it earlier to test your record and play channels.

2. Open Prolink using the shortcut on the desktop or by selecting

Start | Programs |

Profile Applications | Prolink

3. Select an RS-422 serial port, then click

Select

. The Prolink window appears.

4. Test the PVS1100 system using your controller.

5. Repeat steps 2-4 for the number of control ports you need to control the PVS1100

using Profile protocol.

NOTE: For more information on the Prolink user interface see Chapter 8,
“Controlling the Profile XP Remotely” in the Profile XP System Guide.

This completes all the procedures in this Installation Guide. Refer to the Profile XP
System Guide for more information on customizing settings for your application.

Summary of Contents for Profile XP PVS1100











































Search results

Summary of Contents for Profile XP PVS1100

Reviews:

Related manuals for Profile XP PVS1100

Brands by name

Popular brands

GRASS VALLEY Profile XP PVS1100, Installation Manual

Search results

Summary of Contents for Profile XP PVS1100

Reviews:

Related manuals for Profile XP PVS1100

Brands by name

Popular brands