GRASS VALLEY KayakDD-1, Planning And Installation Manual

Page: 45 / 90

KayakDD-1 Digital Production Switcher
6.5 Processor Frame Connectors
N4067
GPI/O - Tally
LAN
RS 485
INPUT REFERENCE
AUX M/E
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
AC POWER IN
100 - 240 V
max. 4A
50/60 Hz
DC POWER
IN OUT
J2 J3
J 4 J 5 J 6 J 7 J 8
PGM-A CLEAN PVW-A CLEAN-PVW AUX 1 AUX 2 AUX 3 AUX 4 AUX 5 AUX 6 AUX 7 AUX 8 AUX 9 AUX 10
J 9 J 10 J 11 J 12 J 13 J 14 J 15 J 16 J 17 J 18
Port 1 Port 2 Port 3
Port 4 Port 5 Port 6
J 19 J 20 J 21
J 22 J 24 J 23
J 25
IN 1
IN 2
IN 3
J 26
J 27
J 28
J 29
J 30
J 31
J 32
J 33
J 34
J 35
J 36
J 37
J 38
J 39
J 40
IN 4
IN 5
IN 6
IN 7
IN 8
IN 9
IN 10
IN 11
IN 12
IN 13
IN 14
IN 15
IN 16
J 41
J 42
ANALOG
J 44 J 43
grass valley
48V / 5A max.
KAYAK DD
1 M/E DIGITAL SWITCHER
48V / 1,6A
R
3S13
Prof. Vid. Equipm.
Listed
Caution:
For continued protection against risk
of fire, repplace only with same type and rating of fuse.
2*T6,3A /H
250V
J1
+
-
+
-
Figure 14 Video Processor Frame Connectors
Jack Designation Note
J1 AC POWER IN
Mains connector (IEC-320, CEE-22) for power supply
to the Video Processor Frame.
Operating Voltage: 100V-240V AC +/-10% auto-range
Caution!
Double-pole or neutral fusing.
After operation of the protective device, parts of
the equipment that remain under voltage might
represent a hazard during servicing.
Caution!
For continued protection against risk of fire,
replace only with same type and rating of fuse!
2x 6.25A /T 250
AC POWER IN Frame power switch
J25
:
J40
INPUTS
IN1 – IN16 BNC / Serial Comp (ITU-R 656) video inputs
J4/J5
J6
J7
J8
M/E OUTPUTS
PGM-A
PVW-A
PGM-B
PVW-B BNC / Serial Comp (ITU-R 656)
Double Program output, A channel
Preview output, A channel
Program output, B channel
Preview output, B channel
J9
:
J18
AUX 1 – AUX10 Auxiliary Outputs, BNC / Serial Comp (ITU-R 656)
44 Planning and Installation Manual