GRASS VALLEY KALEIDO-IP X130, Installation & Service Manual, Page: 88 / 124

88
System Configuration
Cabling and Configuring the Head Streaming to support SMPTE ST 2022 - 7 Redundancy
5 Click Head streaming, in the navigation area on the left side of the page. See also
Configuring Head Streaming , on page 82 for more information.
The Head Streaming Configuration page appears.
6 Expand the streaming options section for the head you want to stream
SMPTE ST 2110 - 20 using SMPTE ST 2022-7 or not.
7 For SMPTE ST 2022 - 7 output redundancy, enable both Enable streaming on LAN5 (A
Network) and Enable streaming on LAN6 (B Network) .
8 Set the Destination IP address and Port number for both SMPTE ST 2110-20 network
streams: LAN5 (A Network) and LAN6 (B Network) . The Destination IP addresses are
multicast IP addresses; see Unicast and Multicast Sources and Destinations , on page 31.
Network mask The appropriate network mask for this subnet. Use the same setting
as configured in the switch for each Kaleido - IP device’s network
ports.
Gateway The IP address for the switch’s port interface to which the
Kaleido - IP’s media port is connected.
Parameter Description