GRASS VALLEY KALEIDO-IP X130, Installation & Service Manual, Page: 81 / 124

81
Kaleido - IP X330/X130
Installation & Service Manual
Configuring Uncompressed IP SMPTE ST 2022-6 / 2110 Inputs
When the multiviewer has been configured to use NMOS, an NMOS controller is able to
remotely control the SMPTE ST 2022-6 / 2110-20 inputs through IS-05. To enable NMOS, see
Configuring the Kaleido - IP to use SMPTE ST 2022-6 / 2110 Inputs and ST 2110 Outputs with
NMOS , on page 90.
PREREQUISITES:
• Uncompressed IP ST 2022-6 / 2110 inputs is a licensed feature. See Available Hardware
and Software Options , on page 75. Obtain the uncompressed IP ST 2022-6 / 2110
inputs ( KIP-OPT-UCIP and Rivermax license ) license keys from Grass Valley. See Grass
Valley Technical Support , on page 124.
• The connected network must have a PTP grandmaster server clock on its domain.
• The Kaleido
- IP’s date and time setting must be set to use PTP . See Configuring a
Multiviewer’s IP, Date, and Time Settings with XAdmin , on page 33.
• Optional multiviewer network ports LAN5 and LAN6 must be equipped on the
multiviewer to provide two high-speed network ports. See Kaleido - IP Multiviewer
Ethernet Port Usage , on page 23. For this, the Kaleido - IP must have two
KIP - OPT - ETH - 1X network interface cards installed. See Kaleido - IP X330/X130 PCI
network interface add-on card options , on page 77 for more information.
• Media ports LAN5 and LAN6 must be configured. See Configuring a Multiviewer’s IP,
Date, and Time Settings with XAdmin , on page 33. Uncompressed streams must use
LAN5
and
LAN6
.
To configure uncompressed IP ST 2022-6 / 2110 inputs
1 Open XAdmin. See Opening XAdmin , on page 55.
2 Install the uncompressed IP ST 2022-6 / 2110 inputs license keys ( KIP-OPT-UCIP and
Rivermax license
) from Grass Valley. See Enabling Options , on page 78.
3 Configure SMPTE ST 2022-6 / 2110 inputs as Virtual Inputs in XEdit. Refer to Virtual
Inputs in the Kaleido Software User’s Manual. See Related Documentation , on page 17.