GRASS VALLEY KALEIDO-IP X130, Installation & Service Manual, Page: 30 / 124

30
IP Network Setup
Networking Essentials
A client PC must have IP connectivity with the Management Network , to communicate with
the multiviewer (see System Requirements for a Client PC , on page 45) so it can be
configured with XEdit and XAdmin. You must also configure any Kaleido-RCP2 units you
may have ordered (see Using a Kaleido-RCP2 with Default Settings , on page 73).
The Kaleido - IP is shipped with the following default settings.
Kaleido - IP default IP settings
Parameter Kaleido - IP-6 Kaleido - IP-4
Management Port IP address (
LAN1
) Assigned by the
network’s DHCP server
Assigned by the
network’s DHCP server
Network mask 255.255.0.0 255.255.0.0
Default gateway 10.0.0.1 10.0.0.1
Link mode Auto-negotiate Auto-negotiate
Media Port 1 IP address (
LAN2
) 10.0.3.70 10.0.3.70
Network mask 255.255.255.0 255.255.255.0
Gateway None None
Link mode Auto-negotiate Auto-negotiate
Media Port 2 IP address (
LAN3
) 10.0.3.71 10.0.3.71
Network mask 255.255.255.0 255.255.255.0
Gateway None None
Link mode Auto-negotiate Auto-negotiate
Media Port 3 IP address (
LAN4
) 10.0.3.72 10.0.3.72
Network mask 255.255.255.0 255.255.255.0
Gateway None None
Link mode Auto-negotiate Auto-negotiate
Media Port 4 IP address (
LAN5
) 172.30.3.74 —
Network mask 255.255.255.0
Gateway None
Link mode Auto-negotiate
Media Port 5 IP address (
LAN6
) 172.30.3.75 —
Network mask 255.255.255.0
Gateway None
Link mode Auto-negotiate
Note:
If the Management Port IP address of your Kaleido - IP has been
changed (i.e. it no longer corresponds to the as-shipped configuration), it is
still possible to determine the current Management Port IP address setting.
See Verifying the Management Port IP Address and Application Version on
page 101.