GRASS VALLEY K2 SOLO -, Service Manual

Page: 68 / 106

68 K2 Solo Media Server Service Manual 09 April 2010
Chapter 3 Service Procedures
1. Make sure the K2 Summit Production Client has no media access currently
underway.
2. At the MS-DOS command prompt, enter the following and press
Enter
.
chkdsk
Check Disk reports file system information and lists any problem found.
3. Do one of the following:
• If Check Disk does not report any problems, close the command prompt
window. Do not complete the remaining steps of this procedure.
• If Check Disk reports a problem and prompts you to repair, continue with this
procedure.
4. When prompted to repair problems, do the following:
a. Press the
Y
key and then press
Enter
.
b. Enter the following and press
Enter
.
chkdsk /F
The screen displays a message similar to the following:
The type of the file system is FAT32.
Cannot lock current drive.
Chkdsk cannot run because the volume is in use by another
process. Would you like to schedule this volume to be
checked the next time the system restarts? (Y/N)
c. Press the
Y
key and then press
Enter
.
5. Restart the K2 Summit Production Client.
Running diagnostics for K2 Summit Production Client
If you suspect a problem with K2 Summit Production Client hardware, you can run
diagnostics and check for errors.
1. Make sure all media access is stopped on the K2 Summit Production Client. Also
make sure that there is nothing preventing a restart, as it is required after you run
diagnostics.
2. From the Windows desktop, click
Start | All Programs | Grass Valley | Diagnostics
.
The Summit Diagnostics application opens.
3. Click
Start
.
The Overall Result indicator displays RUN while diagnostics are underway.