GRASS VALLEY K2 SOLO -, Service Manual

Page: 64 / 106

64 K2 Solo Media Server Service Manual 09 April 2010
Chapter 3 Service Procedures
program loads.
4. In the Acronis True Image main window, click
Backup
.
The Create Backup Wizard opens.
5. On the Welcome page, click
Next
.
The Partitions Selection page opens.
6. Select the
(C:)
partition and then click
Next
.
NOTE: Verify capacity to make sure you select the CompactFlash (CF) and not a
media drive. The CompactFlash has a much smaller capacity.
If a “…choose full backup mode…” message appears, click
OK
.
The Backup Archive Location page opens.
7. In the tree view select
Removable Drive (A:)
as the location to which you are writing
the image.
8. Enter the name of the image file you are creating. Create the file name using the
K2 Solo Media Server hostname and the date. Name the file with the .tib extension.
For example, if the hostname is K2Client1, in the File name field you would have
E:\K2Client1_20091027.tib
. Click
Next
.
The Select Backup Mode page opens.
9. Select
Create a new full backup archive
. Click
Next
.
The Backup Creation Options page opens.
10. Do not change any settings on this page. Click
Next
.
The Archive Comment page opens.
11. If desired, enter image comments, such as the date, time, and software versions
contained on the image you are creating. Click
Next
.
The “…ready to proceed…” page opens.
12. Verify that you are creating an image from the C: drive and writing to the A:\ drive.
Click
Proceed
.
If a “…insert next volume…” message appears, click
OK
.
The Operation Progress page opens and displays progress.
13. When a “Backup archive creation has been successfully completed” message
appears, click
OK
.
14. Click
Operations | Exit
to exit the Acronis True Image program.
The K2 Solo Media Server restarts automatically.
15. Remove the Recovery Flash Drive while the K2 Solo Media Server is shutting
down.
16. Upon restart, log on to Windows. When the AppCenter log on appears, you can
cancel.