GRASS VALLEY K2 SOLO -, Service Manual

Page: 54 / 106

54 K2 Solo Media Server Service Manual 09 April 2010
Chapter 3 Service Procedures
Name adapters
1. If you have not already done so, disable the write filter.
2. If you have not already done so, on the Windows desktop right-click
My Network
Places
and select
Properties
.
The Network Connections window opens.
In the Device Name column you see the adapter names and enumerators that the
Windows operating system has assigned to adapters.
3. Determine which adapter names in the Device name column are assigned to which
(PCI bus X, device 0, function X) location.
4. Reconcile the locations assigned to the adapter names with the names as currently
configured in the Name column.
The required mapping of names to locations is specified in the following table:
5. Proceed as follows:
• If all the names on this K2 Solo Media Server are configured correctly to
locations, skip ahead to the last step of this procedure.
• If names on this K2 Solo Media Server are not configured correctly to locations,
for each adapter name incorrectly configured, complete the remaining steps of
The adapter name (as displayed in the Device Name
column) that is assigned to this location… Must be named as follows:
PCI bus 4, device 0, function 1 Control Connection #1
PCI bus 4, device 0, function 0 Media Connection #1
PCI bus 3, device 0, function 0 Media Connection # 2
PCI bus 3, device 0, function 1 Control Connection #2