manualshive.com logo in svg

GRASS VALLEY K2 SOLO -, Service Manual

Share
Download
GRASS VALLEY K2 SOLO - Service Manual Download Page 32

32

K2 Solo Media Server Service Manual

09 April 2010

Chapter 1   Product Description

Power supply module

The K2 Solo Media Server has one power supply. You can not remove and replace 
the power supply while the K2 Solo Media Server is operational. The power supply 
has a fan with automatic speed control. The power supply has protection for over 
voltage, over current, and short circuits. 

Refer to 

“Power supply removal” on page 99

 for procedures.

Codec module

The K2 Solo Media Server has one codec module. The codec module hosts two media 
input/output channels. The codec module is oriented horizontally across the rear of 
the K2 Solo Media Server chassis. It provides the majority of the K2 Solo Media 
Server’s media-related input and output connectors on the rear panel. The codec 
module plugs into the midplane board.

A codec module can host a pair of codec option cards. It is not allowed to have a codec 
module host just one codec option card. There are two types of codec option cards, as 
follows:

• MPEG-2 encoder card

• AVC-Intra codec card

A codec module that hosts codec option cards must have either two MPEG-2 encoder 
cards or two AVC-Intra codec cards. It is not allowed to have one MPEG-2 encoder 
card and one AVC-Intra codec card on the same codec module.

Check K2 Release Notes for support of MPEG-2 and AVC-Intra.

Refer to 

“Unfasten and disconnect cables” on page 97

 for procedures.

MPEG-2 encoder card

A pair of MPEG-2 encoder cards is a codec module option. A codec module can host 
two MPEG-2 encoder cards, one for each of the codec module’s channels. An 
MPEG-2 encoder card provides MPEG-2 encode functionality to a channel. MPEG-2 
decode functionality is a standard feature and does not require a dedicated card. 

Refer to 

“Codec option card removal” on page 90

 for procedures.

AVC-Intra codec card

A pair of AVC-Intra codec cards is a codec module option. A codec module can host 
two AVC-Intra codec cards, one for each of the codec module’s channels. An 
AVC-Intra codec card provides AVC-Intra encode and decode functionality to a 
channel. 

Refer to 

“Codec option card removal” on page 90

 for procedures.

Summary of Contents for K2 SOLO -











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands