GSI Novus™ Newborn Hearing Screening System User Manual
D-0113050 Rev H
Page 23 of 96
S
YSTEM ASSEMBLY
The Novus will require some assembly before use. Depending on the screening test
types purchased, the system assembly may include:
•
Connecting the preamp cable (ABR license)
•
Connecting the insert earphone cable (ABR license)
•
Connecting the OAE probe (DPOAE or TEOAE or ABR license)
•
Connecting the electrode lead wires (ABR license)
•
Connecting (pairing) the Novus to the MLP 2 printer (optional)
CONNECTING THE PREAMP CABLE OR OAE PROBE TO THE DEVICE
Align the dot at the end of the preamplifier cable or OAE
Probe (for OAE only systems) with the dot on the
preamplifier connector socket at the top of the Novus.
Insert the plug and push it securely into place.
CONNECTING THE INSERT EARPHONE CABLE OR OAE PROBE TO THE PREAMP
Align the plug at the end of the insert earphone cable or
OAE probe with the socket at the top of the preamplifier
cable marked with the graphic
. Insert the plug and
push it securely into place
.
IMPORTANT NOTE
: The plug contains a series of small metal pins that insert into
corresponding jacks in the socket. Be careful that the plug and socket are properly
aligned so that the pins are not bent or broken during insertion. Do not twist the
connector in the socket
.
IMPORTANT NOTE:
The plug contains a series of small metal pins that insert into
corresponding jacks in the socket. Be careful that the plug and socket are properly
aligned so that the pins are not bent or broken during insertion. Do not twist the
connector in the socket.