WALL MOUNT
MULTI-MATERIAL CUTTER
G1089 1/22
Instruction Manual
Model F700-1
Logan Graphic Products Inc., 1100 Brown Street, Wauconda, IL 60084 847-526-5515 www.logangraphic.com
7
Mounting Cutting Beds
9. Drill marked hole centers.
10. Insert four (4) Wall Mollies into wall holes and hammer flush (Fig. 18).
11. Secure Side Brackets to wall with screws and washers.
Install Material Clamp
1. Holding clamp vertically, slide Material Clamp bracket lock nut into Left
Cutting Bed (Fig. 19).
2. Slide Material Clamp until top mounting screw aligns with top mount
block.
3. Attach top mounting screw (Fig. 20).
4. Adjust clamp to be parallel with guide bars (Fig. 21).
5. Tighten clamp bracket knob.
Attach Counter-Balance Weight Bag
1. Attach Pulley to top mount block (Fig. 22).
2. Hook Counter-Balance Weight Bag onto cable post located on right side
of cutting head (Fig. 23).
Fig. 18
Fig. 19
Fig. 21
Fig. 23
Fig. 20
Fig. 22
