WALL MOUNT
MULTI-MATERIAL CUTTER
G1089 1/22
Instruction Manual
Model F700-1
Logan Graphic Products Inc., 1100 Brown Street, Wauconda, IL 60084 847-526-5515 www.logangraphic.com
5
Mounting Top and Bottom Brackets
4. Drill holes using 1/8” drill bit for wood or 1/4” masonry bit for masonry
wall (insert wall mollies using hammer).
5. Mount Top Bracket aligning top three holes on wall with holes in bracket
and secure using washers and screw (Fig. 2).
6. Mount Bottom Bracket aligning bottom two holes on wall with holes in
bracket and secure using washers and screws (Fig. 3).
Mount Cutter Bar
1. Carefully fit top pin in Cutting Bar (Fig. 4) into slot in Top Bracket
(Fig. 5) and align bracket edges along bar assembly edge (Fig. 6).
2. Align Bottom Bracket edge along Cutting Bar side (Fig. 7).
3. Tighten five (5) Mount Screws (Fig. 8).
Fig. 2
Fig. 6
Fig. 4
Fig. 3
Fig. 5
Fig. 7
Fig. 8
