WALL MOUNT
MULTI-MATERIAL CUTTER
G1089 1/22
Instruction Manual
Model F700-1
Logan Graphic Products Inc., 1100 Brown Street, Wauconda, IL 60084 847-526-5515 www.logangraphic.com
13
Changing Cutting Tools
1. Raise Cutting Head Handle to retracted position.
2. Slide back of cutting tool into pivot bar slot until pin drops over end and
into slot (Fig. 41).
3. Pull back and push down on cutting tool handle into seat(Fig. 42).
4. Tool will lock in place.
Using Material Clamp
Use clamp for all materials
EXCEPT GLASS. DO NOT USE ON GLASS.
1. Lift Clamp Handle up (Fig. 43).
2. Move handle forward and down onto material.
3. When clamp is set, there is a rubber pad which holds material secure.
4. To release, pull up and back.
Fig. 41
Fig. 43
Fig. 42
Seat
Using Production Stop
When making several cuts of the same dimension, the production stop
can be used. The stop can be used on left or right cutting beds.
1. Lower stop arm to horizontal.
2. Loosen stop knob.
3. Slide stop to desired dimension.
4. Tighten stop knob to lock.
Using Vertical Scale
The vertical cutting bar scale is a reference scale used to help determine
material size (Fig. 44).
Fig. 44
