Graphic Products DuraLabel 2000 User Manual Download Page 8

Page: 8 / 56

USING THE BATTERY

The DuraLabel 2000 has an intelligent battery voltage monitor. As the voltage drops,

the firmware drives the battery harder to deliver the voltage needed to maintain high

print quality—even as the battery becomes completely discharged. Printed labels
maintain the same high quality right up until the battery is completely exhausted.

Printing large characters and/or large labels requires more power than small ones
and will drain the

battery

faster.

Battery usage is monitored by the printer internally to maximize battery life. If the

printer

is on and not in use after approximately 15 minutes, the

printer

saves the cur-

rent label design and powers off to preserve the

battery

. When the

printer

is turned

on again, the

printer

will resume from the same screen as when it powered off.

WARNING:

Risk of fire or explosion if the

battery

is replaced by an incorrect type. Use only a Graphic

Products approved battery.

Battery Life Indicato

Full Battery

Partial Battery

Empty Battery

-5-

3. The BATTERY cont.

Summary of Contents for DuraLabel 2000
























































Search results

Summary of Contents for DuraLabel 2000

Reviews:

Related manuals for DuraLabel 2000

Brands by name

Popular brands

Graphic Products DuraLabel 2000, User Manual

Search results

Summary of Contents for DuraLabel 2000

Reviews:

Related manuals for DuraLabel 2000

Brands by name

Popular brands