section 12: End of Life information
Page 17
GEnERaL
Grant Solo fan convectors incorporate components manufactured from a variety of different materials.
The majority of these materials can be recycled whilst the smaller remainder cannot.
Materials that cannot be recycled must be disposed of according to local regulations using appropriate waste collection and/or disposal
services.
DisassEmbLY
There is little risk to those involved in the disassembly of this product. Please refer to and follow the Health and Safety Information given
in these instructions.
For guidance on the disassembly of the fan convector refer to the information given in the Servicing section of these instructions.
RECYCLinG
Many of the materials used in Grant fan convectors can be recycled, these are listed in the table below:
COmPOnEnt
matERiaL
Chassis and casing
Mild steel (galvanised)
Heat exchanger
Copper tubes, Aluminium fins
Front casing panel (wall hung units)
Polycarbonate
Connection pipework
Copper
Foam insulation
Semi closed cell polyester
Electrical wiring
Copper/plastic
Printed Circuit boards
Copper/plastic
Transformer
Fans
WEEE
electrical
recycling
(Disassemble)
DisPOsaL
All materials other than those listed above must be disposed of responsibly as general waste.
Neil Sawers
Technical Manager
12 EnD OF LiFE inFORmatiOn
