Grant Solo Compact, Installation And User Instructions Manual

Page: 14 / 20

section 7: spare Parts and section 8: Operating instructions Page 14
7.1 Fan COnVECtOR PaRts List
table 7-1: Fan convector parts list
Description Grant UK product code solo Compact solo Compactmax solo Hideaway
User interface PCB SP0128 • • •
Power and control PCB SP0129 • • •
Plug-in microprocessor
board
SP0133 • • •
Mains ON/OFF switch SP0068 • • •
Fan SP28-24 • • •
Transformer SP0012 • • •
Temperature sensor SP0350 • • •
Capacitor 2μF SP0229 • •
Capacitor 4μF SP0237 •
Flexible hose - 900 mm SP-MB90 •
7 sPaRE PaRts
8.1 mains On/OFF sWitCH
Grant Solo units have a factory-fitted double pole mains ON/OFF
switch.
sOLO COmPaCt anD COmPaCtmax mODELs:
This switch is located under the right-hand end of the front casing.
Refer to Figure 10-1.
Figure 8-1: Solo Compact and CompactMAX mains ON/OFF
switch (underside of unit)
sOLO HiDEaWaY mODEL:
This switch is located on the right-hand side of the unit. It should
have been set to the ON position before being finally fitted in to
the plinth/baseboard.
8 OPERatinG instRUCtiOns
Figure 8-2:
Solo Hideaway mains ON/OFF switch (right-hand
side of unit)
For the unit to operate, ensure that this switch is set to ON and
the power supply to the Solo fan convector is on, i.e. the switch on
the fused spur serving the unit is set to ON.