Grandstream Networks, Inc.
GXP2124 User Manual
Page
30 of 50
Firmware version: 1.0.3.19 Last Updated: 03/2012
Line Key 5
Line Key 6
Line Key 7
Line Key 8
(line keys on the
right side of LCD)
This allows the user to configure line key 5 to line key 8, which has similar functions
as Multi Purpose Keys. Options available for Key Mode are:
1. Speeddial
2. BLF (Busy Lamp Field)
This option has to be supported on the PBX and it indicates the status of the
extension. The three possible states are idle (green), busy (red), ringing
(blinking red).
3. Presence
Watcher
This option has to be supported by a presence server and it is tied to the “Do
not disturb” status of the phone.
4. Eventlist
BLF
This option is similar to the BLF option but in this case the PBX collects the
information from the phones and sends it out in one single notify message.
PBX has to support this feature.
5. Speeddial via active account
This option will act just like speed dial, but based on the current active
account. For instance, if the phone is offhook and account 4 is active, it will
call the configured speed dial number using account 4.
6. Dial
DTMF
This option will allow users to enter a series of DTMF digits as configured in
the UserID field for the MPK during the call. When using Dial DTMF, “Enable
MPK Sending DTMF” (under Advanced Setting) has to be set to “Yes”. This
option is not binding to the account.
7. Call
Return
The last answered calls will be dialed out. The username and UserID should
be blank when using Call Return. This option is not binding to the account.
8. Transfer
This option will allow user to enter the extension number to transfer with
during the call.
9. Intercom
This option allows user to enter the extension number to intercom.
Note:
The functions in 1, 2, 3, 4, 5, 10, 11 are connected to one of the accounts and
have target username (for description purpose in web GUI) and UserID.
Multi Purpose Keys
These options are used to assign a function to the corresponding Multi Purpose Key.
Options available are:
1. Speed
Dial
2. BLF (Busy Lamp Field)
This option has to be supported on the PBX and it indicates the status of the
extension. The three possible states are idle (green), busy (red), ringing
(blinking red).
3. Presence
Watcher
This option has to be supported by a presence server and it is tied to the “Do
not disturb” status of the phone.
4. Eventlist
BLF
This option is similar to the BLF option but in this case the PBX collects the
information from the phones and sends it out in one single notify message.
PBX has to support this feature.
5. Speed Dial Via Active Account
This option will act just like speed dial, but based on the current active
