Grandstream Networks GXP2124 User Manual Download

Page: 10 / 51

Grandstream Networks, Inc.

GXP2124 User Manual

Page

9 of 50

Firmware version: 1.0.3.19 Last Updated: 03/2012

Using the GXP2124 SIP Enterprise Phone

ETTING

AMILIAR WITH THE

LCD

GXP2124 has a dynamic and customizable screen. The screen displays differently depending on whether
the phone is idle or in use (active screen).

Table 7: LCD Display Definition

Display

Definition

DATE AND TIME

Displays the current date and time. Can be synchronized with Internet
time servers.

LOGO

Displays company logo name. This logo name can be customized via
xml screen customization.

NETWORK STATUS

Displays the status of the phone and network. It will indicate whether
the network is down or running (IP address).

LINE STATUS INDICATOR

Displays the name of the account that is in use. Select another account
by pressing the LINE key on the left side.

SOFTKEYS - Idle Screen



SwitchSCR

Press this button to toggle between

different idle screens: default

idle screen, weather information, stock information and currency
information.



ForwardAll

Unconditionally forward the phone line (account 1) to another
phone.



MissedCalls

This option shows up unanswered calls to this phone.



Redial

Redial the last dialed number in idle screen when there is existed
call log.



EndCall

Hang up phone when dialing out or talking.



RefreshStock

Refresh the stock information when stock is enabled.



ReverseCur

Display the currency information in reverse order.



RefreshCur

Refresh the currency information when currency is enabled.

Note

: If XML application is used, the softkey for XML application will

show up in idle screen as configured.

Summary of Contents for GXP2124




















































Search results

Summary of Contents for GXP2124

Reviews:

Related manuals for GXP2124

Brands by name

Popular brands

Grandstream Networks GXP2124, User Manual

Search results

Summary of Contents for GXP2124

Reviews:

Related manuals for GXP2124

Brands by name

Popular brands