19
reset and the memory cleaned.
5. On insertion of the smartcard, as a third option as well
as that of choosing from downloading the data or saving
them in the card (right or left arrow)it is also possible
to format the smartcard; the display will show “Reset
card” and the option must be confirmed using ENTER. A
formatted card can therefore be managed for washing
machines and dryers. As the name of the presets saved,
the formatted card gives a series of “- - - - - - - - - “.
NOTE only a part of the manageable presets can be
saved and those formatted or empty will be identified
with “- - - - - - - - -“
.
6. The name of the saved preset is that of the
2.13 “large
comment”
function inserted from the SERVICE menu.
8.5.2 TRANSFER OF THE FIRMWARE
8.5.2.1 UPLOADING NEW FIRMWARE FROM THE
SMARTCARD
The firmware uploading operation takes place by inserting
the smartcard with the machine off and after having supplied
voltage to the machine the system will act as follows:
1. Incorrect card: the display will indicate “
card not valid
”
also adding an icon with the same message, inviting the
user to remove the card. On removal, the machine will
go back to previous conditions. In this phase a cycles
card is considered NOT correct.
2. Correct card: we will have the “
DOWNLOAD Firmware
”
information with the arrows from the machine card. On
conclusion of the operation the display will show the
card by the usual icon.
If the firmware card is inserted with the machine on in cycle
start stand-by conditions, the G400 DRY will activate the card
recognition routine and the display will show “
Firmware
card
”, without allowing any operation.
8.5.2.2 COPYING THE FIRMWARE INTO THE SMARTCARD
The appliance must be on by pressing the SEL, ECONOMY and
START/STOP buttons together.
At this point the display will show “
UPLOAD Firmware
” and
the icon indicates to insert the firmware card (128kB).
When transfer is completed the icon relative to removal of the
smartcard switches on and once the card has been removed it
is possible to insert another in order to repeat the operation
and so on, thus creating a series of identical smartcards.
The machine must be switched off and on again to return to
standard display.
ATTENTION!
• Do not try to read or program the machine using the
SMARTCARDS that are different to the original one
(cash card, credit card, video hire card etc.) as it would
e damaged irreparably. The manufacturer is NOT liable
for incorrect and improper use of the Smart Card reader
present in the machine.
• Contact the dealer or the after-sales service if machine
programming must be modified using this system.
8.6 RECOMMENDATIONS FOR USING THE MACHINE
• Do not put laundry into the machine that has been
cleaned, wet, washed or stained with flammable or
explosive materials, first proceed with a washing cycle.
Read the instructions before using the appliance in order
to prevent injury to persons/damage to objects.
• Keep solvents and inflammable liquids away from the
appliance. Keep them in a dry, well-aired place that is
not accessible to unauthorised persons.
• Keep cleaning and waxing products out of the reach of
children and locked in a safe place.
• Only use suitable textiles in the dryer and that have
been previously washed.
• Check the labels on the garments, checking that they
can go into the dryer.
• Do not allow children to play near or approach the dryer,
contact with the drum or laundry during functioning can
cause burns, contact a doctor if necessary.
• Do not smoke in proximity of the dryer during use.
• Do not remove or by-pass safety devices.
• Any interventions or maintenance must only be
performed by authorised staff.
• Do not touch the glass during functioning as it may
cause burns.
• Do not switch the machine off if the temperature in the
drum exceeds 50°C.
• If there is a power cut during functioning, open the
door: when the current returns, start the appliance as
soon as possible.
• In order to reduce the global energy consumption of
your laundry it is recommended to prepare the laundry
to be ironed with residual humidity of 5-20%
• Items that have not been previously spun cannot be
dried. The maximum humidity of the laundry before
being dried must be 105%. If necessary, halve the load
per cycle.
• Do not wait for the dryer to cool completely before
starting a new cycle.
• Before shifting, carrying out an intervention and at the
end of working, switch the electric power supply off and
disconnect the plug and socket. Do not pull the cable.
Close the gas and steam cocks.
• After any intervention, make sure that the machine has
been restored correctly and that the parts that protect
access to the mechanical and live parts are organised.
• In order to measure the residual humidity of the laundry
weigh it before washing and after drying. The difference
of these values is the amount of water present in the
laundry, which divided by the original weight gives the
residual humidity.
Summary of Contents for EB10
Page 38: ...38...
