7-1
Install Grill Bowl and Tank Holder (Tank Holder is only for LP Model)
6
Make sure all cooking components are removed from the Grill Bowl. Lift and position the Grill Bowl
over the Support Brackets.
Note:
Make sure the Control Box wire goes through the "U" shaped hole on right cabinet.(as shown)
Align the holes on the Grill Bowl with the holes on the Support Brackets using 8 Pan Head Screws
3/16"x3/8" and tighten securely.
Install Tank Holder onto the Left Bottom Panel using 3 Pan Head Screws 3/16"x3/8" and tighten
securely.(only for LP model)
Pan Head Screw
3/16"x3/8"
Qty. 8
Part # S182G03061
16
Pan Head Screw
3/16"x3/8"
Qty. 3
Part # S182G03061
(only for LP model)
Tank Holder
Control Box
Support Brackets x4
(only for LP Model)
7-1
Install Transformer Bracket onto the Right Cabinet Partition Panel(refer to step 8)
7
Install Transformer Bracket onto the Partition Panel using 2 Pan Head Screws 3/16"X3/8" and tighten securely
as shown below.
Transformer Bracket
Partition Panel(for right cabinet)
Pan Head Screw
3/16"x3/8"
Qty. 2
Part # S182G03061
"U" shaped hole
Grill Bowl
Grill Lid
Partition Panel
