Waste water drainage from shower and sinks
25.
1
Grand Soleil 43'
C
H
A
P
T
E
R
25
Waste water drainage from shower and sinks
Shower waste water drainage installation
◊
The shower water-collecting basins, located below toilet grating,
are drained out by the electric bilge pumps fitted with filter on the
intake.
◊
The control switch to the pump is the
BILGE PUMPS
which is located
in the
PUMPS
section of the 12 V
DC
Functions Panel (§ pages
7
.5 &
7
.6) whereas actual switches are in the front side of the sinks in the
heads.
◊
The two electric pumps for draining the showers are located as
follows (§ page
27
.6):
• For the fore head
under the central seat of the saloon, next to the fresh water pump.
• For the aft head
in the front part of the engine compartment.
• While showering or after, always drain water out of the basin by
activating electrical pump.
• Drainage of the pumps flows into drainage collector located in aft
port peak (§ page
27
.1).
Waste water drainage operations are as follows:
◊
Before entering the shower, select the shower bilge aspiration
valves as follows:
• For the shower in the fore head, on the collector C under the
central seat of the salon open the valve (
C
4) and close the other two
(
C
2 and
C
3).
• For the shower in the aft head, on collector D in the left front part
of the engine compartment open valve (
D
2) and close the other one
(
D
3 ).
• Turn on the
BILGE PUMPS
switch which controls the electrical
pump. It is located in 12 Vdc Functions Panel. This switch
activates the local switches located in the toilets.
• With the panel switch on, turn on the local switch for all the
duration of the shower until waste water has been completely
drained out.
