Grand Design Momentum, Owner'S Manual

Page: 151 / 220

149
Electronics
Electronics
Audio/Visual System Guide
The following is a basic overview of the audio/visual (A/V)
electronics operation. The information in this section is written
for the use of the original factory-installed equipment. Refer to
the manufacturer’s user guides included in your Owner Infor-
mation Package for detailed operating instructions for each
specific component.
If there have been modifications or replacements made to
your electronics system then these instructions may not apply
(please contact the service center or technician who perform-
ed the modifications or substitutions if assistance is required).
Radio operation:
1. Turn ON the radio.
2. Select speaker output using the controls on the radio
face (radio sound does not run through the sound bar).
CD operation
1. Turn ON the radio.
2. Select speaker output using the controls on the radio
face (radio sound does not run through the sound bar).
3. Insert CD to play.
TV operation
1. Turn on the TV power supply.
2. Crank the TV antenna up.
3. Turn on the TV and select your signal input using the
“source” button.
4. Turn ON the sound bar (the TV speakers are not used,
nor does TV sound run through the radio speakers).
DVD operation
1. Turn off the TV power supply.
2. Turn on the TV.
3. Turn ON the sound bar (the TV speakers are not used,
nor does TV sound run through the radio speakers).
4. Insert DVD to play.
The TV power supply
should be turned OFF
when connecting and/or
disconnecting the cables
to the power supply and
antenna, but should be
turned ON when testing for
voltage.
CAUTION