Input display:
Keys work only
with magnetic pen
I/O
A
B
C
1
2
3
MODE
(touch the
„a“ in
the name gr
a
f)
Description of magnet sensor keys (input keys):
I/O
Key
I/O
turns on/off the lubricant metering.
On: the device is on stand-by
Off: the device is off, the heating is still on.
MODE
Key
MODE
switches unit to configuration mode.
Press
the letter a i the a e
gr
a
f.
Press key for 6 seconds (Key is only active when pump is not running,
green LED
„A“
must be off).
1 2 3
Keys
1,2,3
to set numbers.
A short press on key increases number by one.
Description of magnet sensor keys (input keys):
A
Green LED lights up when product is being metered.
B
Yellow LED lights up when applicator is below operating temperature
(lower than 90% of pre-set temperature).
C
Red LED lights up when metering breaks down.
Instruction Manual GRAF SINGLE LUB 2 / Version 4.0
–
05.2020
5
