Graco XM Series Repair Parts Download | Manualshive

Page: 96 / 106

background image

Accessories and Kits

96

313289W

Accessories and Kits

20-Gallon Hopper Kit, 255963

One complete double-wall 20-gallon hopper. See your
hopper manual for more information.

Hopper Heater Kit (240V), 256257

For heating fluid in a 20-gallon hopper. See your hopper
manual for more information.

Universal Hopper Fluid Inlet Kit, 256170

For connecting any of the four lower models included
with XM sprayer to a 20-gallon hopper. See your hopper
manual for more information.

Universal Hopper Mounting Kit, 256259

For mounting a 20-gallon hopper to the side or back of
an XM sprayer. See your hopper manual for more
information.

Twistork Agitator Kit, 256274

For mixing viscous materials held within a 20-gallon
hopper. See your feed pump and agitator kit manual for
more information.

T2 Feed Pump Kit, 256275

For supplying viscous material from a 20-gallon hopper
to an XM sprayer. See your feed pump and agitator kit
manual for more information.

5:1 Feed Pump Kit, 256276

For supplying viscous materials from a 20-gallon hopper
to an XM sprayer. See your feed pump and agitator kit
manual for more information.

7-Gallon Hopper and Bracket Kit,
256260 (Green)
24N011 (Blue)

One 7-gallon hopper and mounting brackets. Mounts to
the side or back of an XM sprayer. See your hopper
manual for more information.

2:1 Drum Feed Kit, 256232

One T2 pump feed kit and one Twistork agitator kit for
mixing and supplying viscous materials from a with
55-gallon drum to an XM sprayer. See your feed pump
and agitator kit manual for more information.

5:1 Drum Feed Kit, 256255

One 5:1 pump feed kit and one Twistork agitator kit for
mixing and supplying viscous materials from a with
55-gallon drum to an XM sprayer. See your feed pump
and agitator kit manual for more information.

Hopper/Hose Heat Circulation Kit, 256273

For circulating heated water mixture through 20-gallon
hoppers, heated hose, and Viscon HP heater. See your
hopper or hose heat circulation kit manual for more
information.

Desiccant Dryer Kit, 256512

For use with 20-gallon hoppers. See your desiccant
dryer kit manual for more information.

Caster Kit, 256262

For mounting casters on XM sprayer frame. See your
caster kit manual for more information.

Hose Rack Kit, 256263

For mounting to side, front, or back of XM sprayer
frame. See your hose rack kit manual for more
information.

Lower Strainer and Valve Kit, 256653

For straining material from a feed pump to an XM
sprayer fluid inlet. See your lower strainer and valve kit
manual for more information.

Not all accessories and kits are approved for use in
hazardous locations. Refer to the specific accessory
and kit manuals for approval details.

«
...
94
95
96
97
98
...
»

Summary of Contents for XM Series











































































































Reviews:

No comments

Related manuals for XM Series

Brand: WAGNER Pages: 96

Brand: Shop fox Pages: 24

Brand: WALTHER PILOT Pages: 17

Brand: Parkside Pages: 76

Brand: Jefferson Pages: 4

Brand: Solo Pages: 13

Chimney Snuffer

Brand: Task Force Tips Pages: 4

Brand: Kremlin-Rexson Pages: 41

Brand: Bartell Global Pages: 20

Brand: REVELL Pages: 2

Brand: Farm King Pages: 108

Brand: Grant-bio Pages: 12

Brand: WALTHER PILOT Pages: 59

Brand: Gardena Pages: 4

Brand: Larius Pages: 12

Brand: GÜDE Pages: 56

Brand: WAGNER Pages: 42

Brand: WALTHER PILOT Pages: 49

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands