c.
If the ram raises the tote off of the ground,
press the air assist (blowoff) button to break
the vacuum between the ram plate and
product.
d.
If the ram does not raise, increase the Ram
Up Pressure.
e.
When the ram plate is free of the tote and the
ram reaches its full height, operate the ram
selector to the Ram Hold position.
3.
Remove the empty tote.
To reduce the risk of injury, including
pinching fingers, while cleaning material
from the ram plate, relieve pump pressure
before using tools to clean. Follow the
Pressure Relief Procedure, page 24
.
4.
Inspect the ram plate and, if necessary, remove
any remaining material or material build-up.
a.
If used, open all user-supplied system fluid
drain valves that are downstream of the
pumps.
b.
Use a tool to remove material build-up.
5.
To empty another tote, perform the steps of
3A5416E
27
