![background image](http://html1.mh-extra.com/html/graco/saniforce-sdu-a01aaa1aa0c21/saniforce-sdu-a01aaa1aa0c21_manual_2251594032.webp)
Electro-pneumatic Control Panel Display Screens
Icon/Field
Icon/Field
Icon/Field
Description
Description
Description
Seal
Seal
Seal Control
Control
Control
Seal
Seal
Seal Inflate
Inflate
Inflate
Press to inflate the ram plate seal.
Stop
Stop
Stop seal
seal
seal action
action
action
Stop inflating or deflating the seal. To resume, press the desired seal action button,
inflate or deflate.
Seal
Seal
Seal Deflate
Deflate
Deflate
Press to deflate the ram plate seal.
Batch
Batch
Batch Information
Information
Information
Current
Current
Current Job
Job
Job
Details of the current batch. This element is only active if feedback has been enabled
on the I/O Settings Screen.
Complete
Complete
Complete Job
Job
Job
Press to mark the current batch as complete. Do not press if the intention is to restart
the current batch again.
Air
Air
Air Assist
Assist
Assist
Air
Air
Air Assist
Assist
Assist
Press and hold to blow air between the ram plate and the product to break the
adhesion between the two. The ram plate seal should be deflated before performing
this operation.
NOTE:
NOTE:
NOTE: Air assist will not operate unless Ram Up or Ram Hold is also selected.
Ram
Ram
Ram Control
Control
Control
Ram
Ram
Ram Up
Up
Up
Momentarily press to raise the ram assembly. The ram will continue raising until the
ram has reached the top of its travel, unless manually stopped by pressing Ram Hold.
Ram
Ram
Ram Hold
Hold
Hold
Momentarily press to keep the ram at the current location.
NOTE:
NOTE:
NOTE: This is an active hold and the system may momentarily energize Ram Up to
keep the ram plate from drifting. Active hold is enabled for 5 seconds after any Pump,
Ram, Seal, or Air Assist command.
Ram
Ram
Ram Jog
Jog
Jog
Press and hold to lower the ram assembly. Releasing the button will stop lowering
the ram.
Ram
Ram
Ram Down
Down
Down
Momentarily press to lower the ram to the lowest position. The ram will continue
lowering until the ram has reached the bottom of its travel, unless manually stopped
by pressing Ram Hold.
32
3A5402J