Installation
8
310622ZAL
Installation
General Information
•
The typical installation shown in F
IG
. 3 is only a
guide for selecting and installing system compo-
nents. Contact your Graco distributor for assistance
in planning a system to suit your needs.
•
Always use genuine Graco parts and accessories.
•
Reference numbers and letters in parentheses refer
to the callouts in the figures and the parts lists on
pages 32 - 42.
Leak Detection System
NOTE: A leak detection system is included with all
approved pumps. See manual 311200 included with
leak detector for leak detector installation instructions.
Tighten Clamps Before First Use
After you unpack the pump, and before you use it for the
first time, check all clamps, and tighten as necessary.
Stand
NOTE: See pages 38 and 39 for parts.
1.
Place the stand assembly on a level surface.
2.
Mount the pump securely to the brackets using bolts
provided.
NOTE: To drain or service the pump, pull on the
quick-release pins (638e, one on each side) to allow the
pump to rotate while still securely mounted to the
bracket.
F
IG
. 1: Quick-release pins for pump rotation
Grounding
•
Pump: Connect a ground wire and clamp as shown
in F
. 2. Loosen the grounding screw (W). Insert
one end of a 12 ga (1.5 mm²) minimum ground wire
(X) behind the grounding screw and tighten the
screw securely. Connect the clamp end of the
ground wire to a true earth ground. To order a
ground wire and clamp, order part number 222011.
The pump is very heavy (see Technical Data on
pages 45 and 48 for specific weights). If the pump
must be moved, follow the Pressure Relief Proce-
dure on page 13 and have two people lift the pump
by grasping the outlet manifold securely, or use
appropriate lifting equipment. Never have one person
move or lift the pump.
Keep clear of moving parts.
Ground the pump and all other equipment used or
located in the pumping area. Grounding reduces the
risk of static and electric shock by providing an
escape wire for the electrical current due to static
build up or in the event of a short circuit. Check your
local electrical code for detailed grounding
instructions for your area and type of equipment.
TI8765b
638e
Summary of Contents for SaniForce 1590 3A
Page 5: ...Models 310622ZAL 5...
