Graco SaniForce 1590 3A, Instructions-Parts List Manual

Page: 43 / 50

Accessories
310622ZAL 43
Accessories
15D990 Leak Detector
Sensor and control package that monitors the dia-
phragm condition. In case of diaphragm failure, the con-
trol will provide an audible alarm and relay contacts for
remote alarms or solenoids. See Leak Detector manual
311200.
NOTE: To be approved, a leak detection system
must be used on the pump. Any pump with a leak detec-
tor installed is NOT Atex approved.
NOTE: To replace a sensor, order Part No. 24B290
Leak Detector Sensor Replacement Kit. The kit includes
one sensor.
3150 Conversion Kits
15H461 3A Approved Ball Check
Conversion Kit
Converts flapper check valve to 3A ball check valve.
Includes four seats and four ball stops. Balls need to be
ordered separately.
16E975 Flapper Valve Conversion Kit
Converts ball check valve to flapper check valve.
Includes four flapper assemblies. See Flapper Check
Valve Assembly, page 32.
15E285 Sanitary Ball Check Conversion Kit
Converts flapper check valve to sanitary ball check
valve. Includes four seats and four ball stops. Balls need
to be ordered separately.
Part No. Description
Qty.
15B406 SEAT, ball 4
15H460 GASKET, 4 in. 12
510490 CLAMP, 4 in. 4
15H407 STOP, ball 4
Part No. Description
Qty.
15H460 GASKET, 4 in., EPDM 12
15D090 HOUSING, upper flapper 4
16D853 HOUSING, lower flapper 4
16D854 VALVE, flapper, weldment 4
510490 CLAMP, 4 in. 4
Part No. Description
Qty.
15D026 SEAT, ball 4
15D346 GASKET, ball stop 4