![background image](http://html.mh-extra.com/html/graco/promix-ii/promix-ii_operating-manual_2251703030.webp)
Run Mode
◆
Power Up Screens
30
310633C
Run Mode
Power Up Screens
When the EasyKey™ power switch is turned on, the
Graco logo and current software revision displays.
Run Screen
This screen displays the operating status of the system
and is the default screen after powering up.
Key
Active Color: color selected at Operator Station.
Target Ratio: for the selected color. The ratio can
be from 0.0:1–30.0:1.
Potlife Timer: shows remaining potlife time in min-
utes.
Actual Ratio: in hundredths.
Current Flow Rate: in cc/min.
Total Job Volume: in cc or oz. Total Job Volume
(A + B) is reset to zero each time the Report
key
is pressed on the Operator Station, or after a color
change or purge.
Animation: When there is flow, the gun appears to
spray, and the component A or B hose light up,
showing which component dispense valve is open.
Status Bar: shows current alarm or operation mode
(Mix, Standby, Purge, or Color change to #).
Current Date and Time
Security Level: a padlock appears on the screen if
a password is required to enter Setup mode. If the
password was set to “0”, no padlock appears and
setup can be entered without a password.
F
IG
. 29: Run Screen
1
2
3
4
5
6
7
8
9
10
1
2
The only key that functions with the Run Screen is
the Setup
key (used to enter Setup mode).
3
4
5
6
7
8
9
10
Summary of Contents for ProMix II
Page 5: ...Related Manuals 310633C 5 ...