Overview
◆
Component Identification and Definition
310633C
9
Flow Meters
Three optional flow meters are available from Graco:
•
G3000 is a general purpose gear meter typically used in flow ranges of 75-3000
cc/min. (0.02–0.79 gal/min.), pressures up to 4000 psi (28 MPa, 276 bar), and
viscosities of 20–3000 centipoise. The K-factor is approximately 0.119 cc/pulse.
•
G3000HR is a high resolution version of the G3000 meter. It is typically used in
flow ranges of 38–1500 cc/min. (0.01–0.4 gal/min.), pressures up to 4000 psi (28
MPa, 276 bar), and viscosities of 20–3000 centipoise. The K-factor is approxi-
mately 0.061 cc/pulse.
•
Coriolis is a specialty meter capable of a wide range of flow rates and viscosities.
Dual Fiber Optic Cable
Used to communicate between the EasyKey™ Display and Smart Fluid Panel.
Fluid Panel Power
Supply Cable
Used to provide power to the Smart Fluid Panel.
Operator Station
Used by the operator for daily painting functions including: choosing color, initiating
report printing, reading/clearing alarms, and placing the system in Standby, Mix, or
Purge mode. It is typically mounted inside the booth or near the painter.
Gun Flush Box
(not shown)
Used to automatically flush manual guns into an enclosed waste container. By flush-
ing with the exact amount of solvent required to clean your system within an enclo-
sure, the gun flush box reduces the amount of solvent used, VOCs (volatile organic
compounds) emissions, and operator exposure to hazardous chemicals.
See Operator Controls, page 26, for detailed information on the EasyKey™ Display and Operator Station.
F
IG
. 1
Component
Description
Operator Station
Fluid Panel Power
Supply Cable
Smart Fluid Panel
Flow Meters
Fluid Manifold
Summary of Contents for ProMix II
Page 5: ...Related Manuals 310633C 5 ...