![background image](http://html.mh-extra.com/html/graco/promix-easy-series/promix-easy-series_manual_2251702010.webp)
Installation
10
309908G
Air Controls
•
Bleed-type main air shutoff valve (D), to shutoff
all air to ProMix Easy (including controller power).
•
Supply air pressure gauge (E), to monitor air pres-
sure to ProMix Easy.
•
Pump air pressure regulator (F) with gauge (G),
to adjust and monitor pump air pressure (not pres-
ent on meter-based systems).
•
Gun air regulator (P) and gauge, available sepa-
rately to adjust and monitor gun air pressure.
Solenoid Module
There are two solenoids inside the pneumatic control
box, one to actuate dispense valve A, one to actuate
dispense valve B.
Fluid Controls
The ProMix Easy mix manifold includes the following
fluid controls. See manual 310654 for complete informa-
tion about the mix manifold. See F
. 6.
•
Dispense valves (F
A
, F
B
) dispense component A
and component B. Solenoids A and B turn the dis-
pense valves ON and OFF.
•
Shutoff valves (G
A
, G
B
) shutoff fluid A or B from
entering the fluid manifold.
•
Sampling valves (H
A
, H
B
), to batch dispense or
test pumps/meters.
•
Solvent purge valves (J
A
, J
B
) allow solvent to
enter the fluid manifold.
A minimum air pressure supply of 70 psi (483 kPa,
4.8 bar) must be maintained for the ProMix Easy
to operate properly.
TI4808a
AB
Summary of Contents for ProMix Easy Series
Page 38: ...Technical Data 38 309908G ...