![background image](http://html1.mh-extra.com/html/graco/probell-electrostatic-controller/probell-electrostatic-controller_instructions-and-parts_2251234047.webp)
Setup Screen 7 (Log Level)
Use Setup Screen 7 (Parameter P07) to select the
log level (LoG) for how much information is logged in
the system (used for troubleshooting only). Press
buttons T5/T6 to change the setting. A setting of
0 means nothing is logged. A setting of 5 means
everything is logged. 2 is the default.
NOTE: For logging, a micro SD card must be inserted
in the slot found on the main circuit board. If a
software update has been done by installing a micro
SD card, this card can be used for logging. If no
card has been installed, or to verify whether one is
present, see
.
The controller can export log reports of controller
activity to an installed micro SD card for test purposes
and for finding defects.
NOTE: If a micro SD card is present when the
controller is turned on, the log messages are
recorded in a file (MESSAGES.LOG) located in
the root directory. When the file size reaches
32 MB, it is renamed MESSAGES.1 and a new
MESSAGES.LOG file is created. Subsequent log file
names will be sequentially numbered.
Setup Screen 8 (Averaging Interval)
Use Setup Screen 8 (Configuration C0) to select the
averaging interval (in seconds) used to calculate the
dynamic arc. Press buttons T3/T4 to change the
setting. The default is sufficient for most applications.
See
for more information.
• Range is 0.01 – 1.00 by 0.01
• Default 0.10 (shown)
3A3657C
47