Setup Screen 0 (System Type)
Setup Screen 0 (Parameter P00) displays the
type of electrostatic applicator (APP) in use. The
Electrostatic Controller is factory set to 0 (Std) or 1
(UUb) and cannot be changed.
NOTE: This parameter is not overwritten if a Factory
Default Reset is performed.
Std: Solventborne product: 100 kV maximum
UUb: Waterborne product: 60 kV maximum
Setup Screen 1 (Electrostatics Control
Mode)
Setup Screen 1 (Parameter P01) displays the
electrostatics control mode (Ctrl) in use. The
Electrostatic Controller is factory set to Current (1,
CUrr) and cannot be changed.
3A3657C
43