Pressure Control Transducer
3A4587B Operation, Repair, Parts
31
Pressure Control Transducer
Removal
1. Remove two screws (108) and open cover (62a).
2. Disconnect transducer (155) lead from control
board (62e).
3. Pull transducer connector through strain relief
bushing (151).
4. Remove transducer and o-ring (99) from filter
housing (67).
Installation
1. Install o-ring (99) and transducer (155) in filter hous-
ing (67). Torque to 35 - 45 ft-lb.
2. Install transducer connector and strain relief bush-
ing in control housing.
3. Connect lead (155) to control board (62e).
4. Close cover (62a) and secure with two screws
(108).