Operation
14
3A4587B Operation, Repair, Parts
10. Inspect fittings for leaks. Do not stop leaks with your
hand or a rag! If leaks occur, turn striper OFF imme-
diately. Perform
Grounding Procedure (For Flam-
mable Materials Only)
, page 8. Tighten leaky
fittings. Repeat
Startup
, steps 1 - 7. If no leaks,
continue to trigger gun until system is thoroughly
flushed. Proceed to step 8.
11. Place siphon tube in paint pail.
12. Trigger gun again into flushing fluid pail until paint
appears. Assemble Rac Tip and Rac Guard.
Rac Tip and Guard Assembly
To prevent spray tip leaks, make certain spray tip and
tip guard are installed properly.
1. Perform
Pressure Relief Procedure
, page 8.
2. Engage trigger lock. Insert seat and Rac Tip Seal.
Insert Rac Tip.
3. Screw assembly onto gun. Hand tighten.
High-pressure spray is able to inject toxins into the
body and cause serious bodily injury. Do not stop
leaks with hand or rag.
ti27613a
ti27774a
To avoid serious injury from skin injection do not put
your hand in front of the spray tip when installing or
removing the spray tip and tip guard.
ti27775a
ti27776a