Graco Hydra-Spray EH 433 GT 226-432 L Series, Instructions-Parts List Manual

Page: 24 / 28

ACCESSORIES
Must be purchased separately.
STATIC FREE NYLON HOSE
3000 psi (210 bar) MAXIMUM
WORKING PRESSURE
Part No. ID Length Thd. Size
223–540
223–541
214–703
214–705
1/4” (6.4 mm)
1/4” (6.4 mm)
3/8” (9.5 mm)
3/8” (9.5 mm)
25 ft (7.6 m)
50 ft (15.2 m)
25 ft (9.5 m)
50 ft (15.2 m)
1/4 npsm(f)
1/4 npsm(f)
3/8 npt(m)
3/8 npt(m)
167–981
LINK (2)
102–667
SCREW (4)
167–980
SUPPORT
102–399
CASTER
207–490 PAIL SUPPORT
BALL VALVES
shown in drain mode
ELBOW
100–840
HOSE TO
SPRAY GUN
TO PUMP
FLUID OUTLET
FILTER
TWO SPRAY GUN HOOKUP
214–711 BALL VALVE
5000 psi (350 bar) MAXIMUM WORKING PRESSURE
100–840 ELBOW, 1/4 npt(f) x 1/4” npt(m)
Each line in a two gun system must have (1) a shutoff
valve so one gun can be isolated for servicing while
the other is in operation; and (2) a drain valve to re-
lieve line pressure if the gun tip becomes clogged.
Ball valve no. 214–711 is recommended for both pur-
poses. We also recommend using elbow no. 100–840
to direct the outlet flow from the drain valve in a safe
direction to a pail.
In the drain mode, the ball valve handle is turned away
from the elbow (marked DRAIN on housing). In the
operating mode, the handle is turned toward the el-
bow (marked CIRC on the housing).
10
2
3/4 npsm
9
1
3
5
4
7
8
6
207–485 SUCTION TUBE
55 gallon (200 liter)
Ref
No. Part No. Description Qty
1 156–593 PACKING, o–ring 1
2 214–961 HOSE, coupled 1
3 100–220 SCREW, thumb 1
4 100–279 BALL 1
5 159–100 BALL RETAINER 1
6 176–684 ADAPTER, bung 1
7 159–101 HOUSING, intake valve 1
8 156–589 UNION, swivel 1
9 156–591 ELBOW, adapter 1
10 156–592 TUBE, riser 1
1
6
3
5
4
2
1
208–920 SUCTION TUBE KIT
5 gallon (19 liter)
Ref
No. Part No. Description Qty
1 101–818 HOSE CLAMP 2
2 160–327 UNION, 90 swivel, 3/4 npt(m x f)
1
3 170–705 ADAPTER, intake 1
4 170–706 HOSE, 1” ID x 48”, nylon tube 1
5 170–957 TUBE, suction 1
6 181–072 STRAINER 1